Climatic Flexible Air Distribution Shaft, Through 1 November 2010, Checking

Climatic Flexible Air Distribution Shaft, Through 1 November 2010, Checking

Flexible shaft for adjusting unit of air distribution doors:

- Let fresh air blower run on highest speed. If air flows out of defroster vents in the "Defrost" position and no air flows out of footwell vents, installation of flexible shaft is correct. If this is not the case, remove flexible shaft from adapter. Place controls for heating and A/C system, Climatic onto adapter and rotate rotary knob for air distribution 1/2 rotation (180°). Refer to => [ Flexible Air Distribution Shaft ] Flexible Air Distribution Shaft. Then re-connect flexible shaft. Repeat test