Rear Subframe: Description and Operation

Subframe and Final Drive Assembly Overview

The - arrow - points in driving direction.






1 Subframe

2 Rear Bonded Rubber Bushing

• Replacing, refer to => [ Subframe Bonded Rubber Bushing ] .

3 Front Bonded Rubber Bushing

• Replacing, refer to => [ Subframe Bonded Rubber Bushing ] .

4 Final Drive

5 Bolt

• M12 x 105

• 60 Nm + 90° turn

• Always replace if removed.

6 Washer

• Installed between final drive and subframe.

7 Washer

• Washer must be placed with holes on tabs of bonded rubber bushing.

8 Bolt

• M12 x 105

• 60 Nm + 90° turn

• Always replace if removed.