CD Changer: Service and Repair

CD Changer

Special tools, testers and auxiliary items required

• Radio Removal Tool (3316)

Radio Removal Tool (3316) is made up of two identical parts.

• The CD changer is not faulty if the CD changer plays commercially available CD's, but not self-burned CD's. Replacing the CD changer for this reason is not permitted.

• Mix CD's (CD's that contain computer data and also music) cannot be played.

• Music CD's with 8 cm diameter (mini-discs) cannot be played back.

• When retrofitting CD changer, radio functions must always be coded again.

Removal

• CD changer is installed under the foldable center armrest.

Do the following before starting the procedure:

- Turn off the ignition and all electric consumers and remove the key.

- Open foldable center armrest completely.

- If necessary, remove CDs remaining in CD changer, refer to the Owner's Manual.

- Slide (3316) into slots designed for them on CD changer at left and right until they engage audibly.

- Pull out CD-changer using radio removal tools - arrows -.






- Disengage harness connector at points designated with - arrows - and disconnect it.






- Press on retaining clamp - arrow - and pull out radio removal tools from removed unit.






Installation

Install in reverse order of removal.