2.0L Engine

Transmission to Engine Tightening Specifications






- Drive Plate to Converter

• 60 Nm

• Quantity: 6, remove and install using the socket SW15 (V/175).

- M12 Bolts

• 80 Nm

• 65 Nm, if using insert tool 18 mm (T10179).

- M10 Bolts

• 40 Nm

• The bolts are located in the lower flange.

Arrows - For the alignment sleeves in the engine

- Make sure the bracket does not touch the Automatic Transmission Fluid (ATF) cooler.






Nuts - 8 Nm