Turbocharger

Turbocharger

• Various hose connections are secured.

• The charge air system must be properly sealed.

• Always replace self-locking nuts, seals, gaskets and clamps.

• Fill with engine oil before installing the turbocharger oil supply line to the connection.

• After installing the turbocharger, let the engine run at idle for approximately 1 minute. This ensures the turbocharger will have an adequate supply of oil.


• Follow the safety precautions when working on the charge air system and turbocharger. Refer to => [ Safety Precautions ] Safety Precautions.

• Observe the rules for cleanliness. Refer to => [ Clean Working Conditions ] Clean Working Conditions.

Always follow these instructions before and during work.