Resetting With Vehicle Diagnosis Tester

Service Interval Display, Resetting with Vehicle Diagnosis Tester

- Connect the Vehicle Diagnosis Tester.
- Switch the ignition on.
- Select >>Guided Functions<<.

If the displays indicated in the procedure are not shown on the display. Refer to Operating Instructions for the Vehicle Diagnosis Tester.

- Select the following one after the other:
Brand
Type
Model year
Engine Code

- Confirm the VIN.
- Select the following one after the other:

"Instrument cluster"
"Service Interval Display, Resetting"

- Perform Adaptation according to instructions from >>GUIDED FUNCTIONS<<.

Ending the adaptation:
- Select >>Go to<< and then press >>End<<.
- Turn off ignition and disconnect diagnostic connection.
- Switch the ignition on.

After switching on the ignition, service event is no longer indicated in the odometer display in the instrument panel insert.