Fresh Air Intake

Fresh Air Intake

Removing

- Remove the plenum chamber cover.

- Remove the cover - 1 - from the plenum chamber.






- Check Air quality sensor (G238) functionality, refer to => [ Air Quality Sensor (G238) ] Description and Operation.

- Disconnect connector.

- Turn the air quality sensor - 1 - to the right and remove it.






- Remove the flange nuts - arrows - (2.5 +/- 0.4 Nm) and the air grille.






Installing

Install in reverse order of removal.

• The seal must fit correctly in the air grille.

Assembly sequence:

- Align the air grille on the flange.

- Hold the air grille and install the side flange nuts (2.5 +/- 0.4 Nm) and then the center flange nuts.