Cylinder Head Cover Overview

Cylinder Head Cover Overview






1 Bolt

• 5 Nm

2 Fuel Rail (High Pressure Reservoir)

• With the fuel injection lines.

• Do not change the shape of the fuel injection lines.

3 Bolt

• 22 Nm

4 Fuel Injector (Piezo Injection Unit)

• Removing and installing, refer to => [ Fuel Injectors ] Service and Repair.

5 Bolt

• 5 Nm

6 Sealing Cap

7 Bushing

• For the fuel rail mounting.

• Replace if damaged.

8 Nut

• 10 Nm

9 Tensioning Plate

• Note the installed position, refer to => [ Tensioning Plate Installed Position ] Fuel System Component Overview.

10 Wire Guide

11 Cylinder Head Cover

• Removing and installing, refer to => [ Cylinder Head Cover ] Cylinder Head Cover.

12 Gasket

• Replace if damaged or leaking.

13 Bolt

• 10 Nm

• Follow the tightening sequence, refer to => [ Cylinder Head Cover ] Cylinder Head Cover.

14 Cap

15 Heat Shield