Rear Wheel Housing Liner

Rear Wheel Housing Liner

Removing






- Remove the wheel.

- Remove the bolts - 2 -.

- Remove the back part of the wheel housing liner - 1 - from the wheel housing.

Installation






• Check the expanding nuts - 3 - for damage and replace if necessary.


Check the gas-tight expanding nuts - 4 - for damage and replace if necessary.

The expanding nuts seal off the passenger compartment from exhaust gas and must always be replaced if they are damaged.

- Install the rear wheel housing liner - 1 - making sure it is not bent.

- Install and tighten the screws - 2 -.

- Install the wheel.