Fan Shroud

Fan Shroud

Removing

- Remove the cover for the air duct, disengage the side clips - arrows - to do so.






- Unclip the lower air duct, disengage the clips - arrows - to do so.






- Remove the bolts - 1 - from the top.






• The left bolt is under the coolant connector.

- Remove the noise insulation.

Tiguan






- Remove the bracket - 1 - by removing the bolts - arrows -.

Continuation for All






- Disconnect the connector - 2 -.

- Remove the bolts - 3 - and remove the fan shroud downward.

Installing

Install in the reverse order of removal. Note the following:

• Install the fan shroud from underneath.

• Tightening specifications, refer to => [ Radiator, Fan Shroud and Fan Overview ] Radiator, Fan Shroud and Fan Overview.