Diagram 75/14 (Tracks 169-182)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Heated oxygen sensor, Radiator identification sensor, Leak detection pump





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G39 - Heated oxygen sensor Exhaust System Overview

G611 - Radiator identification sensor Cooling System Components Overview

J519 - Vehicle electrical system control module Control modules in front part of vehicle - Overview of Control Modules

J623 - Engine control module, in the center plenum chamber Control modules in front part of vehicle - Overview of Control Modules

T6w - 6-pin connector, in the engine compartment, rear

T94 - 94-pin connector

V144 - Leak detection pump
Locations

Z19 - Oxygen sensor heater Exhaust System Overview

(E7) - Connection (87a) (in Motronic multiport fuel injection wiring harness)

Previous Diagram 75/13 (Tracks 155-168)

Next Diagram 75/15 (Tracks 183-196)