Convertible top storage sensor (G565) - vehicles from VIN 8V036221

Convertible top storage sensor (G565) - vehicles from VIN 8V036221

• All screws are microencapsulated and must always be replaced.






- Remove luggage compartment side trim.

- Remove screw - 2 - and remove sensor - 1 - from main hinge - 4 -.

When changing sensor, route a new wire - 3 - from sensor to control module. The new wire must be secured in wiring harness. The old sensor is disconnected and the old wire remains in the wiring harness.

Tighten screws - 2 -: 1 Nm.