License Plate Holder

License Plate Holder

Removing

• The license plate holders are different sizes depending on market.






- Remove clips - 1 - and remove license plate holder - 2 - from radiator grille - 3 -.

Installation






With Holes Present

- Place license plate holder - 2 - on radiator grille - 3 - and press in clips - 1 -.

With No Holes Present

- Hold license plate holder - 2 - on bumper and center holder - 2 - to radiator grille - 3 -.

- Mark the mounting points and carefully drill holes with an 8 mm drill.

- Place license plate holder - 2 - on radiator grille - 3 - and press in clips - 1 -.