Diagram 110/11 (Tracks 127-140)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine coolant temperature sensor on radiator outlet, Engine control module, Positive crankcase ventilation heating element, EVAP canister purge regulator valve 1, Camshaft adjustment valve 1, Exhaust camshaft adjustment valve 1, Leak detection pump





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G83 - Engine coolant temperature sensor on radiator outlet Locations Engine Coolant Temperature Sensor On Radiator -G83-

J623 - Engine control module Control Modules in Engine Compartment

N79 - Positive crankcase ventilation heating element Locations

N80 - EVAP canister purge regulator valve 1 Locations [1][2]Canister Purge Control Valve

N205 - Camshaft adjustment valve 1 Locations Camshaft Adjustment Valve 1 -N205-

N318 - Exhaust camshaft adjustment valve 1 Locations Exhaust Camshaft Adjustment Valve 1 -N318-

T3af - 3-pin connector

T14a - 14-pin connector, in the engine compartment, left

T60 - 60-pin connector

T94 - 94-pin connector

V144 - Leak detection pump Locations [1][2]Diagrams

(D181) - Connection 2 (87a) (in engine compartment wiring harness)

* - USA only

Previous Diagram 110/10 (Tracks 113-126)

Next Diagram 110/12 (Tracks 141-154)