Exhaust Manifold

Exhaust Manifold

Removing

- Remove the upper intake manifold. Refer to => [ Upper Intake Manifold ] Upper Intake Manifold.

- Remove the coolant pipe from the heat shield - arrows -. Remove the bolts - 1 - and then remove the heat shield and intake manifold support.






- Remove front exhaust pipes to exhaust manifolds nuts - arrows - and slide back slightly.






• The oxygen sensors remain installed.

- Remove the upper and lower nuts - arrows - on both exhaust manifolds.






- Remove the exhaust manifold toward the back.

Installing

Installation is carried out in the reverse order while noting the following:

• Replace gaskets and self locking nuts.

Tightening Specifications