Front Bass Speaker

Front Bass Speaker

• Removing and installing on the left and right sides is identical.

Removal

Perform the following steps before starting:

- Turn off the ignition and all electrical consumers and remove the key.

The door trim panel must first be removed in order to access the speaker..

- Loosen and remove the locking mechanism from the connector - A -.






- Drill out the rivets - arrows - with a commercially available drill and remove the speaker.






• Remove any shavings resulting from the drilling, otherwise they may cause corrosion damage later.

• If paint on door frame is damaged during drilling, touch-up immediately.

Installing

- When installing, secure the new speaker with special pop rivets (note the replacement part number!).

Install in reverse order of removal.