Flex Plate: Service and Repair

Drive Plate

Special tools, testers and auxiliary items required

• Counter Holder Tool (10-201)

Removing





• Engine or transmission removed.

- Mark the drive plate to the engine.

- Install the (10-201) to loosen bolts.

- Remove the drive plate.

- Remove the shim behind it.

Installing

Installation is performed in the reverse order of removal, noting the following:

- Place the 1.5 mm shim on the crankshaft.

- Install the drive plate with 3.4 mm washer.

- Secure with new bolts.

- Reposition the (10-201) to tighten the bolts. Tightening specification: 30 Nm + 90° (1/4/) additional turn.