Rear Suspension

Suspension Strut

Removing


Before starting work, stabilizer bars must be coupled in vehicles with separable stabilizer bars. Otherwise, there is the danger of injury caused by unintentional coupling.

- Remove suspension strut - arrows -.





- Insert wood block between underbody - arrow A - and rear upper control arm - arrow B -.





This is needed to press down wheel bearing housing.

- Remove nut for bolt - arrow -.





- Using wood block, press down wheel bearing housing far enough to remove bolt - arrow -.

- Remove suspension strut.

Installing

Installation is performed in the reverse order of removal.

Tightening Specifications