Front Air Spring Damper Assembly Overview

Front Air Spring Damper Assembly Overview






1 Bolt

• Quantity: 4

• 30 Nm

2 Mounting Bracket

3 Nut

• 60 Nm

• Always replace after removal.

4 Rubber Mount

5 Seal

• Always replace.

6 Residual Pressure Retaining Valve

• 10 Nm

• Observe important notes about removal and installation. Refer to => [ If residual pressure retaining valve sticks, the vehicle must be on a hoist and the wheels must rotate freely in order to replace the valve. ] Front Suspension.

• Removing and installing, refer to => [ Residual Pressure Retaining Valve ] Front Suspension.

7 Air Spring

• Follow repair notes for servicing air spring dampers. Refer to => [ Air Spring Damper Repair Information ] Air Spring Damper Repair Information.

• When the vehicle has been driven 200,000 km, if there is damage to an air spring, it is recommended that the opposite air spring is also replaced.

8 Buffer Stop

9 Shock Absorbers

• Allocation, refer to Electronic Parts Catalog (ETKA).

• Follow repair notes for servicing air spring dampers. Refer to => [ Air Spring Damper Repair Information ] Air Spring Damper Repair Information.

10 Seal

• Always replace.

• Grease with (N 052 150 00).

11 Boot

• Always replace.

12 Clamp

• Always replace.