Fender Name Plate Dimensions, Individual

Fender Name Plate Dimensions, Individual

Left Name Plate Dimensions





1 Dimension - a - = 479 mm

• Transfer - dimension a - from the bottom edge of the name plate to the fender

2 Dimension - b - = 10 mm

• Transfer the - dimension b - from the end point of - dimension a - out to the corner point of the emblem.

3 Dimension - c - = 83 mm

• Check the distance between the upper edge of the name plate to the edge of the fender with - dimension c -.

4 Dimension - d - = 112 mm

• Check the distance between the lower edge of the name plate to the edge of the fender with - dimension d -.

Right Name Plate Dimensions





1 Dimension - a - = 481 mm

• Measure - dimension a - from the bottom edge of the fender out on the fender.

2 Dimension - b - = 30 mm

• Transfer the - dimension b - from the end point of - dimension a - out to the corner point of the emblem.

3 Dimension - c - = 103 mm

• Check the distance between the upper edge of the name plate to the edge of the fender with - dimension c -.

4 Dimension - d - = 112 mm

• Check the distance between the lower edge of the name plate to the edge of the fender with - dimension d -.