Exhaust Gas Recirculation Cooler Pump

Exhaust Gas Recirculation Cooler Pump

Removing

- Drain the coolant. Refer to => [ Draining and Filling ] Draining and Filling.

- Disconnect electrical connector - 2 -.





- Remove the bolts - 1 -.

- Remove the coolant hoses, to do so, loosen the hose clamps - arrows -.

- Remove the Exhaust Gas Recirculation (EGR) cooler pump (V400) with the engine lifting eye.

- Remove the bolts - arrows - and remove the EGR cooler pump from the engine lift eye.





Installing

Installation is performed in reverse order of removal, noting the following:

• Secure all hose connections using hose clamps appropriate for the model type, refer to the parts catalog.

- Fill the cooling system. Refer to => [ Draining and Filling ] Draining and Filling.