Crankshaft, Cylinder Block -Fastener Tightening Specifications

Fastener Tightening Specifications





• 1 Always replace

• 2 Insert using locking compound, refer to the parts catalog

Guide Frame Bolt Tightening Sequence and Specification





- Replace the bolts - 1 through 16 -.

- Tighten the guide frame bolts in the following sequence:

- Tighten bolts - 1 through 16 - to 30 Nm.

- Tighten bolts - 1 through 16 - to 50 Nm.

- Tighten bolts - 1 through 16 - an additional 90° (1/4) turn.

Sealing Flange Bolt Tightening Sequence and Specification





- Tighten the sealing flange - arrow - bolts in a diagonal sequence and in stages to 9 Nm.

Lower Timing Chain Cover Bolt Tightening Sequence and Specification





- Tighten bolts - 1 through 9 - from the inside toward the outside diagonally to 5 Nm.

- Tighten bolts - 1 through 7 - from the inside toward the outside diagonally to 9 Nm.

- Tight bolts - 8 and 9 - to 22 Nm.

Upper Left Timing Chain Cover Bolt Tightening Sequence and Specification





- Tighten bolts - 1 through 3 - in a diagonal sequence to 5 Nm.

- Tighten bolts - 4 - in a diagonal sequence to 9 Nm.

- Tighten bolts - 1 through 3 - to 9 Nm.

Upper Right Timing Chain Cover Bolt Tightening Sequence and Specification





- Tighten bolts - 2 through 4 - in a diagonal sequence to 5 Nm.

- Tighten bolts - 1 - in a diagonal sequence to 9 Nm.

- Tighten bolts - 2 through 4 - to 9 Nm.