Upper Left Coolant Pipe

Upper Left Coolant Pipe

Removing

- Drain the coolant. Refer to => [ Draining and Filling ] Draining and Filling.

- Remove the Exhaust Gas Recirculation (EGR) cooler switch over valve (N345) - 1 - from the bracket.





- Remove the bolt - 4 - and the engine cover ball studs - 2 -.

- Free up the wiring harness - 3 - on the top of the coolant pipe on the left side.

- Loosen the clamps - arrows - and remove the upper left coolant pipe.

Installing

Installation is performed in reverse order of removal, noting the following:

Tightening specifications, refer to => [ Coolant Pipes Overview ] Description and Operation.

• Secure all hose connections using hose clamps appropriate for the model type, refer to the parts catalog.

- Fill the cooling system. Refer to => [ Draining and Filling ] Draining and Filling.