Left Rear Coolant Pipe on Exhaust Gas Recirculation Auxiliary Cooler

Left Rear Coolant Pipe on Exhaust Gas Recirculation Auxiliary Cooler

Special tools, testers and auxiliary items required

• Hose Clip Pliers (V.A.G 1921)

Removing

- Drain the coolant. Refer to => [ Draining and Filling ] Draining and Filling.

- Remove the bolt - 1 -.





- Remove the left rear coolant pipe from the Exhaust Gas Recirculation (EGR) auxiliary cooler.

- Loosen the clamp - arrow - and remove the left rear coolant hose.

Installing

Installation is performed in reverse order of removal, noting the following:

Tightening specifications, refer to => [ Coolant Pipes Overview ] Description and Operation.

• Secure all hose connections using hose clamps appropriate for the model type, refer to the parts catalog.

- Clean and/or smooth the sealing surfaces of the O-rings.

- Lubricate the O-ring with coolant and slide it onto the coolant pipe.

- Fill the cooling. Refer to => [ Draining and Filling ] Draining and Filling.