Diagram 42/5 (Tracks 43-56)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Driver's Seat Adjustment Control Module, Driver's Backrest Adjustment Sensor, Lumbar Support Height and Fore/Aft Adjustment Sensor, Driver's Seat Lumbar Support Height and Curvature Adjustment Motor





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G219 - Driver's Backrest Adjustment Sensor

G374 - Lumbar Support Height Adjustment Sensor

G375 - Lumbar Support Fore/Aft Adjustment Sensor

J519 - Vehicle Electrical System Control Module Control Modules in Rear Seats

J810 - Driver's Seat Adjustment Control Module

T4az - 4-Pin Connector

T4de - 4-Pin Connector

T4df - 4-Pin Connector

T4dg - 4-Pin Connector

T4dl - 4-Pin Connector Overview Of Connector Stations And Connectors

T6bb - 6-Pin Connector

T6bc - 6-Pin Connector

T8ab - 8-Pin Connector, below driver's seat Overview Of Connector Stations And Connectors

T10p - 10-Pin Connector, below driver's seat

T26a - 6-Pin Connector, white

V45 - Driver's Backrest Adjustment Motor

V125 - Driver's Seat Lumbar Support Curvature Adjustment Motor

V129 - Driver's Seat Lumbar Support Height Adjustment Motor

(B397) - Comfort System CAN-Bus High Connection 1 (in main wiring harness)

(B398) - Comfort System CAN-Bus High Connection 2 (in main wiring harness)

(B406) - Comfort System CAN-Bus Low Connection 1 (in main wiring harness)

(B407) - Comfort System CAN-Bus Low Connection 2 (in main wiring harness)

(M42) - Connection 2 (in driver's seat wiring harness)

* - Connector colours black or brown are depending on equipment

Previous Diagram 42/4 (Tracks 29-42)

Next Diagram 42/6 (Tracks 57-70)