17 Inch Caliper (1KQ)

17 Inch Caliper (1KQ)

• Install the complete repair kit when servicing.

• Only use mineral spirits to clean brake parts.

• Apply a thin coat of assembly paste (G 052 150 A2) to the brake cylinders, pistons and seals.





1 Cap

• Installs onto the bleeder valve.

2 Bleeder Valve

• 12 Nm

• Apply a thin coat of assembly paste (G 052 150 A2) to the threads before installing.

• SW 8

3 Brake Caliper

4 Seal

• Removing and installing, refer to => [ Rear Caliper Piston ] Rear Caliper Piston.

5 44 mm Piston

• Removing and installing, refer to => [ Rear Caliper Piston ] Rear Caliper Piston.

• Apply a thin coat of assembly paste (G 052 150 A2) to the piston when installing.

6 Protective Cap

• Do not damage when installing the piston.