17 Inch Caliper (1KF)

17 Inch Caliper (1KF)

• Install the complete repair kit when servicing.

• Only use mineral spirits to clean brake parts.

• Apply a thin coat of assembly paste (G 052 150 A2) to the brake cylinders, pistons and seals.





1 Cap

• Installs onto the bleeder valve.

2 Bleeder Valve

• 12 Nm

• Apply a thin coat of assembly paste (G 052 150 A2) to the threads before installing.

• SW 10

3 Brake Caliper

4 Seal for 28 mm Piston

• Removing and installing, refer to => [ Rear Caliper Piston ] Rear Caliper Piston.

5 Seal for 30 mm Piston

• Removing and installing, refer to => [ Rear Caliper Piston ] Rear Caliper Piston.

6 28 mm Piston

• Removing and installing, refer to => [ Rear Caliper Piston ] Rear Caliper Piston.

• Apply a thin coat of assembly paste (G 052 150 A2) to the piston when installing.

7 30 mm Piston

• Removing and installing, refer to => [ Rear Caliper Piston ] Rear Caliper Piston.

• Apply thin coat of assembly paste (G 052 150 A2) to the piston when installing.

8 Protective Cap for 28 mm Piston

• Do not damage when installing the piston.

9 Protective Cap for 30 mm Piston

• Do not damage when installing piston.

10 Connecting Line

• 17 Nm

11 TORX Bolt

12 Protective Plate