Inner Door Seal

Inner Door Seal

At the factory, sealant is applied to the door seals. They are they positioned on the door flange and rolled on.

• During removal of the seal, sealant is distributed on interior side of seal and the sides can be bent open easily. If the seal is being installed again, the sealing performance and proper seating are no longer guaranteed.

• For this reason, every completely removed seal must be replaced with a so-called "hammer-stroke seal".

• With partially removed seals, press the edges of the seal together before installing.

Removing inner door seal

- Remove necessary pillar trim, refer to





- Remove sill panel strip. Refer to

- Remove the inner door seal from the body flange.

Door inner seal, installing

- Vulcanization point of inner door seal - arrow - must be aligned with marking on A-pillar - arrow -.