Recirculation Door Motor (V113)

Recirculation Door Motor (V113)

Removing

- Remove the glove compartment. Refer to Storage Compartments, Covers and Trim.

- Remove the adjustment motor cover - 1 -.






- Disconnect the connector from the recirculation door motor - 2 -.

- Remove recirculation door motor - 2 -.

Installing

Install in reverse order of removal.

• After installing, function of recirculation door must be checked.

• Initiate "Basic Setting" function with Vehicle Diagnostic Tester. Refer to => [ Climatronic A/C System with Automatic Controls, Checking and Adjusting Components ] Climatronic A/C System with Automatic Controls, Checking and Adjusting Components.