Openings for Vanity Lamp and Screen Separator, Cutting in Headliner

Openings for Vanity Lamp and Screen Separator, Cutting in Headliner

If the headliner is being replaced, it may be necessary to cut openings in the new headliner.

- Attach the knife blade (58 mm) (V.A.G 1561/2) to the electric cutter (V.A.G 1561A).

- Use the old part as a template.

- Place the template on the material side of the new part and mark the cutting lines.

- Make the cuts in the material side with the electric cutter (V.A.G 1561A).

• A carpet knife can also be used as an alternative to the electric cutter (V.A.G 1561A).

- Install the "vanity lamp" and "screen separator" in the new part.