Gears, Shafts

Special Tools

Special tools, testers and auxiliary items required

• Carrier Bearing Installation Tool (3350)

• Thrust Piece (T10266)

• Tube 60 mm Dia. (VW 415 A)

• Base Block (VW 441)

• Gearbox Holder (2004/1)

• Thrust Plate (2050)

• Thrust Pad (3062)

• Press Support (3118)

• Thrust Washer (3401)

• 2-Arm Puller (20/10)

• Thrust Pad Con. 8/65 (VW 433)

• Support Channels (VW 457)

• Thrust Pad (VW 510)

• Holding Fixture (VW 801)

• Thrust Pad (30-11)

• Thrust Piece (40-105)

• Tapered Roller Bearing Puller (V.A.G 1582)

• Attachment to V.A.G 1582 (V.A.G 1582/4)

• Grip (V.A.G 1582/7)

• Press Appliance (VW 459)

• Split Tube (VW 463/2)

• Thrust Piece (VW 473)

• Front and Rear Bearing Tool (3348)

• Tube Trans. Drive Shaft (VW 426)

• Pulling Hook (T20143/1)






• Thrust Piece (T10233)











Special tools, testers and auxiliary items required

• Thrust Plate (VW 401)

• Thrust Plate (VW 402)

• Punch (VW 407)

• Punch (VW 408 A)

• Thrust Disc (VW 412)

• Thrust Tube (VW 454)






Special tools, testers and auxiliary items required

• Thrust Tube (VW 455)

• Sleeve (VW 519)

• Press Tube (2040)

• Pressure Washer (3074)

• - 1 - Kukko Extractor 14.5-18.5 mm (21/2)

• - 1 - Kukko Extractor 37-46 mm (21/5)

• - 1 - Kukko Extractor 37-46 mm (21/6)

• - 1 - Kukko Extractor 46-58 mm (21/7)

• - 1 - Kukko Extractor 56-70 mm (21/8)

• - 1 - Kukko Extractor 56-110 mm (21/89)

• - 2 - Kukko Puller 65-160 mm (18/1)

• - 3 - Kukko Separating Tool 22-75 mm (17/1)

• - 3 - Kukko Separating Tool 22-115 mm (17/2)

• - 4 - Kukko Support (22/1)

• - 4 - Kukko Support (22/2)

• - 4 - Kukko Support (22/4)






Special tools, testers and auxiliary items required

• Thrust Pad 16.5/28 mm Dia. (VW 431)

• Arbor 50 mm Dia. (VW 432)

• Thrust Pad (VW 447 i)

• Tube 42 mm Dia. (VW 516)

• Thrust Pad (30-205)

• Thrust Piece (40-105)