Driver Side Airbag Crash Sensor G179

Driver Side Airbag Crash Sensor G179

• The Front Passenger Side Airbag Crash Sensor (G179) is located on the front door subframe.

Removing


Follow all Safety Precautions when working on an airbag. Refer to => [ Airbags Safety Precautions ] Airbags Safety Precautions.

- Disconnect the battery.

- Remove driver side front door trim. Refer to => [ Front Door Trim ] Front Door Trim

- Remove the front door subframe.

- Drill out pop rivet - 1 - and - 2 -

- Press connector lock and remove connector - 4 - from Driver's Side Airbag Crash Sensor (G179) - 3 -.






Installation

- Connect connector - 4 - to Front Passenger Side Airbag Crash Sensor (G179) - 3 -.

- Secure Front Passenger Side Airbag Crash Sensor (G179) with pop rivet - 2 - to subframe using Pop rivet pliers (VAS 5072).

- Secure Front Passenger Side Airbag Crash Sensor (G179) with pop rivet - 1 - to subframe as described.






- Install in reverse order of removal.

- Turn on the ignition.


Make sure that no persons are in the vehicle.

- Connect the battery.