Driver Front Airbag Crash Sensor G283

Driver Front Airbag Crash Sensor G283

• The Driver Front Airbag Crash Sensor (G283) in installed in the engine compartment above the left longitudinal member.

Removing


Follow all Safety Precautions when working on an airbag. Refer to => [ Airbags Safety Precautions ] Airbags Safety Precautions.

- Disconnect the battery.

- Press the connector lock and remove the connector - 1 - from the Driver Front Airbag Crash Sensor (G283) - 3 -.

- Remove bolt - 2 - (6 Nm).






Installation

- Install in reverse order of removal.

- Turn on the ignition.


Make sure that no persons are in the vehicle.

- Connect the battery.