Evaporator Housing Assembly Overview

Evaporator Housing Assembly Overview

- Remove the heating and A/C unit. Refer to=> [ Heating and A/C Unit ] Heating and A/C Unit.

- Disconnect the air distribution housing/evaporator housing from the heating and A/C unit. Refer to => [ Air Distribution Housing ] .





1 Evaporator Housing: Lower Part

• Disassembling and assembling, refer to => [ Heater ]

2 Evaporator

• Check insulation, it must be completely present

• Removing and installing, refer to => [ Evaporator ] Service and Repair

3 Clip

4 Evaporator Housing: Upper Part

• Disassembling and assembling, refer to => [ Heater ]

5 Screw

6 Seal / Insulation

• Heat insulation for expansion valve

• Removing and installing, refer to => [ Evaporator ] Service and Repair

7 Bracket

• Removing and installing, refer to => [ Evaporator ] Service and Repair