Wiper Blade: Service and Repair

Windshield Wiper System

Wiper Blade

Removing

- Press together both steel rails on closed side of wiper rubber using universal pliers, remove at side from upper clip and remove rubber complete with rails out of remaining clips of wiper blade.





Installing

- Guide both steel rails into first groove of wiper rubber so that holes in rails point toward rubber and engage in rubber tabs of groove.

- Install the new wiper blade into the lower clips on the wiper blade.

- Press together both steel rails using universal pliers and insert into upper clip so that clip tabs engage on both sides into the grooves - arrow - on the wiper blade.