Headlamp Washer Spray Nozzle: Service and Repair

Headlamp Washer System

Spray Nozzle Holder and Spray Nozzles

CAUTION!
• Turn off the ignition and all electrical components.

• Remove the ignition key.

Removing

- Remove the front bumper.

- Remove the screws - 4 - from the nuts - 5 -.





- Remove the hose for the headlamp washer system - 3 - from the bracket - 2 -.

- Pull the hose - 3 - off the spray nozzle holder - 1 -.

Installing

Install in reverse order of removal, noting the following:

- Tighten the screws to the tightening specification. Refer to => [ Headlamp Washer System Assembly Overview ] Headlamp Washer System.

• Bleed the headlamp washer system by operating it several times after installing.