Headlamp Washer Reservoir: Service and Repair

Headlamp Washer System


Headlamp Washer System Auxiliary Reservoir

CAUTION!
• Turn off the ignition and all electrical components.

• Remove the ignition key.

Removing

- Remove the front bumper.

- Remove screws - 1 -.





- Remove the auxiliary reservoir - 2 - from the reservoir for the windshield washer system - 3 -.

Installing

Install in reverse order of removal, noting the following:

- Tighten the screws to the tightening specification. Refer to => [ Headlamp Washer System Assembly Overview ] Headlamp Washer System.

• Bleed the headlamp washer system by operating it several times after installing.