Transmission Output Speed Sensor

Transmission Output Speed Sensor

Removing

- Remove valve body => [ Valve Body ] Valve Body.

- Remove bolt - 2 - of Transmission Output Speed (RPM) Sensor (G195).





- Remove sensor from housing.

Installing

Installation is in reverse order of removal. Note the following:

- Press sensor into transmission up to stop.

- Tighten bolt - 2 - of Transmission Output Speed (RPM) Sensor (G195) => [ (Item 17) Bolt, 7 Nm ] Valve Body Assembly Overview.

- Install valve body => [ Valve Body ] Valve Body.