Wiring Harness Repair Set

Wiring Harnesses and Connectors, Repairing

Safety Precautions

CAUTION!
When performing repairs on airbag and seat belt tensioner wiring harness, use only terminals, connectors and wires designated for it.

CAUTION!
Be sure to read the information regarding repairing the wiring harnesses for the airbag and pretensioner.

Observe country-specific regulations.

Pay attention to decals designating high voltage components. When performing repairs, residual voltage must be discharged.

The wiring harnesses for the airbag and the pretensioner may be repaired only with the (VAS 1978 B). Refer to => [ Airbag and Belt Tensioner Wires, Repairing ]. Airbag and Belt Tensioner Wires, Repairing

Refer to User's instructions of (VAS 1978 B)

Wiring Harness Repair Set

Special tools, testers and auxiliary items required

• Wiring Harness Repair Set VAS 1978/A (VAS 1978 B )





Wiring harness and connector repairs on vehicle electrical system may only be performed using (VAS 1978 B)!

The (VAS 1978 B) includes instructions, in which procedures for performing repairs are described in detail.

Additional information, e.g. for the installation and removal of components and assemblies, can be found in the relevant repair information.