Brake Light Switch: Adjustments

Brake Light Switch, Adjusting, from 03.00

Removing

Brake light switch (F) must be removed for adjustment.

- Disconnect connector from brake light switch ( F).

- Remove brake light switch (F) by rotating counterclockwise 45 degrees.





- Before installing, remove plunger completely.

- Guide brake light switch (F) through assembly hole, press against pedal and secure by rotating 45 degrees toward right





- Brake always remains in rest position while doing so (not operated).

- Connect connector for brake light switch (F).

- Check function of brake light.

After adjusting brake light switch ( F), check whether brake pedal is in end position (released position).