Rear Lid Carrier With Microswitch, Convertible

Rear Lid

Rear Lid Carrier with Microswitch, Convertible

Removing

- Remove rear lid trim.





- Unclip pull rod - 4 - and - 6 - (USA only).

- Disconnect harness connector - 17 -.

- Disconnect harness connector for micro switch - 12 - and unclip connector from retaining plate.

- Remove bolts - 11 -.

- Remove retaining plate - 15 -.

- Remove carrier with micro switch

Installing

Installation is performed in the reverse order of removal.