Treble Speaker In Instrument Panel

Speakers

Treble Speaker In Instrument Panel

Removing

- Switch off ignition, switch off all electrical consumers and remove ignition key.

- Push center cover - 1 - in the direction of - arrow A - and remove it.





- Remove screws - arrows -.





- Lift the plenum chamber cover slightly.





- Disconnect the harness connectors - arrows - on the underside.





- Carefully drill out the rivets - arrows - and remove the speaker from the side trim.





Installing

- Install in reverse order of removal, noting the following:

Secure the new speaker with commercially available blind rivets (correct length and hole).

• Note the installation location.