Telematics Control Head (E264)

Telematics Control Head (E264)

CAUTION!
The individual buttons of the Telematics control head or the complete Telematics control head cannot be removed. The entire interior rearview mirror must be replaced if there is a malfunction.

The Telematics control head is installed in the interior rearview mirror.

Removing

- Switch off ignition, switch off all electrical consumers and remove ignition key.

- Remove interior mirror.

Installing

Install in reverse order of removal.

- Check the coding for the Telematics. Refer to => [ Telematics Control Module , Coding ] Testing and Inspection.