FREE REPAIR MANUALS & LABOR GUIDES 1982-2013 Vehicles
Courtesy of Operation CHARM: Car repair manuals for everyone.
Home >> Volkswagen >> 2010 >> Jetta GLI (1K2) L4-2.0L Turbo (CCTA) >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Steering and Suspension >> Relays and Modules - Steering >> Steering Mounted Controls Communication Module >> Service and Repair >> Steering Column Switch, from 06.10 >> Steering Column Combination Switch (E595), Valeo

Steering Column Combination Switch (E595), Valeo







Steering Column Combination Switch (E595), Valeo


Follow the specified sequence when removing and installing steering column switch components. Refer to => [ Steering Column Switch Components, Removal and Installation Sequence ] Steering Column Switch Components, Removal and Installation Sequence.

Removal

- Remove the steering wheel.

- Remove the steering column trim.

- Remove the steering column electronic systems control module (J527). Refer to=> [ Steering Column Electronic Systems Control Module ] Steering Column Electronic Systems Control Module (J527).

- Open the tabs - arrows - and remove the steering column combination switch (E595) from the steering column switch base carrier.






Installation

- Slide the steering column combination switch into the guides on the steering column switch base carrier until it latches secure.

Further installation is done in reverse order of removal.

pro multis Credits:Operation CHARM About Operation CHARM