Upper B-pillar Trim

Upper B-pillar Trim

• Removing and installing on the left side of the vehicle is described here. Removing and installing on the right side is identical.

Removal

- Remove sill panel trim. Refer to => [ Sill Panel Trim ] Sill Panel Trim.

- Remove the airbag emblem - 1 - and remove the bolt - 2 - (4 Nm).

• When re-installing, emblem for airbag - 1 - must be replaced.

- Pull trim in lower area out of mounts in body - arrow A -.

- Remove trim from door seal.

- Pull trim out of top mounts - arrow B -.

- Remove belt end fitting from front the seat belt => [ (Item 2) Belt Anchor ] Front Seat Belts Assembly Overview - 2 -

- Guide out seat belt through trim opening.





Installation

• When installing, driver for belt height adjuster - 4 - and button in trim - 3 - must be located in the same position.

• Before installation, clip must be checked for damage and replaced if necessary.





- To install, perform the steps used for removal in reverse order.