Center Console and Footwell Trim Mounting Bracket

Center Console and Footwell Trim Mounting Bracket

Removal

- Turn off the ignition.

- Remove center console:

• Basis (Jetta from MY 2010 and Golf Wagon from MY 2010), refer to => [ Center Console, Basis ] Center Console, Basis.

• Highline (Jetta from MY 2010 and Golf Wagon from MY 2010), refer to => [ Center Console, Highline ] Center Console, Highline.

- Remove the two nuts - 3 - (8 Nm) and remove the center console mounting bracket - 2 -.

- Remove the nut - 4 - (2.5 Nm) and remove the footwell trim panel mounting bracket - 1 -.

• Removing the right footwell trim panel mounting bracket it identical.





Installation

- To install, perform the steps used for removal in reverse order.