Blaupunkt Navigation System and Radio "TravelPilot DX-R4/RN S4"

Blaupunkt Navigation System and Radio "TravelPilot DX-R4/RN S4"

Radios/navigation systems are supplied having a fixed code. Fixed code means that every unit with anti-theft coding has been programmed with its own code. This fixed code must be activated after installation.

For unit Blaupunkt "TravelPilot DX-R4 / RN S4", activate fixed code as follows:

The security coding of the unit is not active until the code number is entered. Activate the security code as follows:

- Turn on the radio/navigation system by pressing button - 5 -.






- Coding is activated in set-up menu "SECURITY" - arrow - as follows:






Start in a "base" or "function menu".






- Press the MEN button - 3 - "TWO TIMES".

Unit switched to Set-up Menu.

If the "settings" menu or the "navigation menu" is active:

- Press the MEN button - 3 - "ONE TIME".

Unit switched to Set-up Menu.

In order to perform adjustments and activate menu points,

- move the selection bar with the right turn/push button - 4 -.

- Select "SAFETY" - arrow -.






- In the "SAFETY" set-up menu, mark the menu point "CODE" and press the push/turn button - 4 -.






- Enter the number code by turning the right turn/push button in the number display - arrow 1 -. Press the right turn/push knob briefly after entering each number to confirm.






• If a wrong number was mistakenly entered, select the"back symbol "<-", and press the ESC button - 2 -.






- Perform the following:

- Enter the entire code.

- Confirm the code by marking the "return symbol" - 2 - by pushing the turn/push knob.






The correct code has been entered when the current state is displayed behind "CODE" after a short "adaptation phase".

• Basic setting is "OFF", i.e. code is not activated.

• Basic setting is "ON", i.e., the code is activated.

On "Sound System" radio system for USA and Canada vehicles, activate fixed code as follows:






- Switch on radio.

The unit automatically displays "SAFE" and then "1000". It is not necessary to press any buttons.

- Enter the code number from the radio card using the radio station buttons 1 through 4. Use button 1 for the first digit of the code number, button 2 for the second digit, etc.

- Press the button "arrow" located above the "FAD" button. Hold the button until the anti-theft coding is activated. This is indicated by a short signal tone.

If the code number has been entered correctly in the radio, a radio frequency appears in the display.

On "Premium Sound System" radio system for USA and Canada vehicles, activate fixed code as follows:






- Switch on radio.

The unit automatically displays "SAFE" and then "1000". It is not necessary to press any buttons.

- Enter the code number from the radio card using the radio station buttons 1 through 4. Use button 1 for the first digit of the code number, button 2 for the second digit, etc.

- Press the radio station button located under the "OK" in the display (normally this is the last radio station button). Hold the button pressed until the anti-theft coding is activated. This is indicated by a short signal tone.

If the code number has been entered correctly in the radio, a radio frequency appears in the display.