Stabilizer Bar Assembly Overview

Stabilizer Bar Assembly Overview

- Arrow - points in direction of travel.





1 Stabilizer

• Note different suspension versions. Refer to => [ Vehicle Data Label ] Application and ID.

• Removal and installation, refer to => [ Stabilizer Bar ] Stabilizer Bar.

2 Rubber Mount

• Replace mounts always on both sides of vehicle.

3 Clamp

4 Bolt, 25 Nm + 45°

• Tighten uniformly.

• Always replace after removal.

• Always tighten threaded connections in curb weight position. Refer to => [ Wheel Suspension, Lifting into Curb Weight Position ] Rear Suspension.

5 Wheel Bearing Housing

6 Nut, 45 Nm

• Self-locking

• Always replace after removal.

7 Bolt

• Self-locking

• Always replace after removal.

8 Coupling Rod

• Connects stabilizer to trailing link/wheel bearing housing.

9 Subframe