Electromechanical Steering Gear Assembly Overview, Generation 3

Electromechanical Steering Gear Assembly Overview, Generation 3






1 Electrical Wiring

2 Universal Joint

3 Bolt

• 30 Nm

• M8 x 35

• Always replace after removal.

4 Bolt

• 6 Nm

• Self-tapping

5 Shield

6 Power-Assisted Steering Gear

• With Power Steering Control Module (J500).

• With Electromechanical Power Steering Motor (V187).

• With Steering Torque Sensor (G269).

• With Steering Angle Sensor (G85).

• Can be tested in Guided Fault Finding using the Vehicle Diagnosis, Testing and Information System (VAS 5051B).

• Removal and installation, refer to => [ Steering Gear, Generation 3 ] Steering Gear, Generation 3.

7 Left Wheel Bearing Housing

8 Nut

• 20 Nm + 90° turn

• M12 x 1.5

• Self-locking

• Always replace after removal.

9 Bolt

• 50 Nm + 90° turn

• Always replace after removal.

10 Subframe

11 Right Wheel Bearing Housing