Electromechanical Steering Gear Assembly Overview, Generation 2

Electromechanical Steering Gear Assembly Overview, Generation 2






1 Universal Joint

2 Bolt

• 30 Nm

• Always replace after removal.

3 Electrical Wiring

4 Power-Assisted Steering Gear

• With Power Steering Control Module (J500).

• With Electromechanical Power Steering Motor (V187)

• With Steering Torque Sensor (G269).

• Can be tested in guided fault finding using the Vehicle diagnosis, testing and information system (VAS 5051B).

5 Wheel Bearing Housing

6 Nut

• 20 Nm + 90° turn

• M12 x 1.5

• Self-locking

• Always replace after removal.

7 Subframe with Brackets

8 Bolt

• 50 Nm + 90° turn

• Always replace after removal.

9 Shield

10 Bolt

• 6 Nm

• Self-tapping.